Slant Six Pro K1080

This tire is best in intermediate to hard pack terrain. The Slant Six has a massive amount of grip, both in the straights and in the turns. Cornering knobs are positioned far down the casing so you can test the limits in the turns.

  • Designed for speed, grip, and cornering assurance; this tire has it all for intermediate to hard-packed terrain
  • Downhill version features 2-ply construction and Stick-E rubber; Cross-country versions feature light-weight single-ply casings and DTC rubber
  • Front and Rear application

Want to purchase this tire?

  • Dual Tread Compound (DTC)

    The original dual tread rubber compound for Kenda. A hard long lasting and fast rolling rubber (60sA) comprises the center of the tread area, while a softer-tackier should rubber (50sA) completes this binary compound for the versatility of speed and grip off road. Found typically on cross country, all-mountain and cyclocross tires.
  • L3R Pro (L3RP)

    L3R Pro is Kenda’s most versatile compound. L3R Pro is found on anything from road racing to cross country (XC) mountain bike tires. At 60sA, the L3R Pro is a fast and solid performer. The benefits are light-weight, fast rolling and increased tread life.
  • RSR (RSR)

    Kenda’s latest super soft and slow rebounding rubber compound (42 shore A durometer) takes grip and traction to a whole new level. As equally adept at holding onto wet slippery roots as it is on dry hot rubble, all while providing its own form of suspension through rebound control. Developed with the gravity rider in mind and tested by professional downhillers and slalom riders, this race only compound is not your everyday training tire. Found only on Kenda’s premium downhill and freeride tires.
  • Stick-E (STICK-E)

    Stick-E is Kenda’s original all mountain and downhill rubber compound. The 50sA rubber still provides sure grip for a wide range of trails and conditions while lasting longer than softer compounds. In addition to being used as the shoulder compound on DTC tires, Kenda also offers tires in complete Stick-E compound for the all mountain rider who wants a balanced tire life with a sure grip.
  • Downhill Casing (DHC)

    The DHC begins with an added layer of the woven CAP ply under the tread that also covers the sidewalls of the tire down to the bead. This is further reinforced by including butyl inserts above the bead for extra sidewall stability, rim protection, and reducing the chance of pinch flats.
  • Rough Rocky Terrain (RRT)

    Best for Rough and Rocky Terrain.
  • Light Mud (LM)

    Best for use in light mud.
  • Hard Pack Dry Terrain (HPDT)

    Best for Hard Pack and Dry Terrain.
  • SCT (SCT)

    TUBELESS AND TOUGH Kenda Sidewall Casing Technology (SCT) is the modification of existing Kenda tire construction methods. By adding an additional sheet of Nylon fabric across the sidewall of the tire, from bead up to tread block, it results in the optimization of the tire construction for fluid based tubeless conversion systems. Additionally, the SCT construction increases the structural strength of sidewalls; bolstering resistance to slices and abrasions, helping reduce the chance of catastrophic damage that fluid sealants cannot seal.
Part No. Size ETRTO PSI TPI Compound Protection Bead WT (Grams) Tubeless Ready
212678 29x2.35 58-622 50 120 DTC KSCT FOLDING 869±43 YES
212677 29x2.35 58-622 50 120 DTC NA FOLDING 773±39 NO
212687 29x2.20 54-622 50 120 DTC KSCT FOLDING 849±42 YES
212669 29x2.20 55-622 50 120 DTC NA FOLDING 709±35 NO
212670 29x2.00 50-622 50 120 DTC KSCT FOLDING 804±40 YES
212668 29x2.00 50-622 50 120 DTC NA FOLDING 673±34 NO
212680 29x1.80 45-622 60 120 DTC KSCT FOLDING 599±30 YES
212679 29x1.80 45-622 60 120 DTC NA FOLDING 520±26 NO
212682 27.5x2.10 54-584 60 120 DTC KSCT FOLDING 745±26 YES
212681 27.5x2.10 54-584 50 120 DTC NA FOLDING 636±31 NO
212671 26x2.50 62-559 50 60 RSR CAP WIRE 1215±40 NO
212226 27.5x1.95 50-584 80 60 DTC NA WIRE 606±31 NO
212667 26x2.50 62-559 50 60 STICK-E CAP WIRE 1215±40 NO
212658 26x2.35 58-559 50 60 RSR CAP WIRE 1302±65 NO
212666 26x2.35 58-559 50 60 STICK-E CAP WIRE 1171±59 NO
212665 26x2.35 58-559 50 120 STICK-E NA FOLDING 660±30 NO
212672 26x2.35 58-559 50 120 DTC KSCT FOLDING 738±37 YES
212663 26x2.35 58-559 50 120 DTC UST FOLDING 811±41 YES
212664 26x2.35 58-559 50 120 DTC NA FOLDING 682±35 NO
212659 26x2.10 54-559 50 120 DTC KSCT FOLDING 695±35 YES
212661 26x2.10 54-559 50 120 DTC UST FOLDING 822±41 NO
212662 26x2.10 54-559 80 120 DTC NA FOLDING 602±30 NO
212660 26x1.95 50-559 65 120 LITE-DTC NA FOLDING 634±32 NO
213235 24x2.60 66-507 60 60 L3R PRO NA WIRE 720±36 NO
213236 20x2.60 66-406 60 60 L3R PRO NA WIRE 574±29 NO
212686 29x2.20 56-622 50 60 DTC NA WIRE 892±45 NO
212684 29x2.00 50-622 50 60 DTC NA WIRE 848±48 NO
212688 27.5x2.10 52-584 50 60 DTC NA WIRE 792±40 NO
212683 26x2.10 54-559 80 60 DTC NA WIRE 737±37 NO
­ ­